
This driver is for kernel ver 2.4.x and 2.6.x .
You can install this driver using the following steps.
This driver have been verified under RedHat 7.3, RedHat 8.0 ,
RedHat 9.0 and Fedora Core 1,2,3. Other distributions with 
kernel 2.4.x or kernel 2.6.x should be ok. 


1. build & install JetCard driver by the following command 

make 

2. the default major number of this driver is 30
   and the serial port name will be /dev/ttyJ0 to /dev/ttyJ63.
   If these device files are not created, use the following script to create it.

./mknod.jetcard

3. The jetcard driver will automatically load on next boot. 
or you can use the following command to load jetcard driver immediately.

/etc/init.d/jetcard start

